General: Flat webbing sling in woven webbing
Type: Double ply (B type)
Configuration: Flexible sling consisting of a single element in sewn webbing
Endings: 1 triangular male ring made of steel, 1 female ring made of steel, category 5
Traceability: High resisting blue pvc label sewn on the sling.
Instructions of use: Ensure that sling is protected from any sharp corners and/or abrasive surfaces, use either protective polyester, polyurethane sleeves or coatings.
DO NOT USE DAMAGED SLINGS.
Storage: Store in a cool, dry and protected from sunlight area.
Maintenance: Never dry sling near a fire or any source of heat.
Design: Textile sleeve, 100% polyester, sewn at the two endings to reinforce an protect the eyes
- Material: 100% polyester multifilament fibres of high tenacity
- Marking: According to standard, Manufacturer’s symbol, working load limit (WLL), effective working length, CE marking, batch number, handling instructions
- Temperature range: From -40°C to +100°C.
- Standard: EN 1492-1
New Table
Male buckle for flat webbing sling Cat. 5 | ||||||||||
WLL (tons) | 1 | 1,5 | 2 | 2,5 | 3 | 4 | 5 | 6 | 8 | 10 |
Ø (mm) | 12 | 14 | 16 | 18 | 20 | 23 | 25 | 28 | 32 | 35 |
Webbing width (mm) | 30 | 50 | 60 | 75 | 90 | 120 | 150 | 180 | 240 | 300 |
D (mm) | 30 | 40 | 82 | 32 | 40 | 45 | 55 | 55 | 60 | 75 |
E (mm) | 72 | 86 | 104 | 127 | 144 | 180 | 220 | 260 | 340 | 400 |
H (mm) | 64 | 80 | 100 | 98 | 119 | 132 | 185 | 180 | 202 | 250 |
New Table
Female buckle for flat webbing sling Cat. 5 | ||||||||||
WLL (tons) | 1 | 1,5 | 2 | 2,5 | 3 | 4 | 5 | 6 | 8 | 10 |
Ø (mm) | 12 | 14 | 16 | 18 | 20 | 23 | 26 | 28 | 32 | 35 |
D hook passage (mm) | 35 | 33 | 40 | 45 | 50 | 55 | 65 | 65 | 70 | 75 |
E (mm) | 104 | 124 | 147 | 178 | 203 | 245 | 290 | 345 | 435 | 495 |
P (mm) | 25 | 36 | 46 | 52 | 56 | 57 | 82 | 81 | 91 | 100 |
H (mm) | 103 | 139 | 161 | 181 | 205 | 215 | 300 | 285 | 340 | 385 |
Webbing sling polyester
EN 1492-1
Safety Factor 7:1 | Straight pull | Basket hitch | Choke hitch | Basket hitch | ||
|---|---|---|---|---|---|---|
 |  |  |  | |||
| 0°−45° | 45°−60° | |||||
| Width | Working load limit (WLL) in tons | |||||
| 50 mm | 1,0 | 2,0 | 0,8 | 1,4 | 1,0 | |
| 60 mm | 2,0 | 4,0 | 1,6 | 2,8 | 2,0 | |
| 90 mm | 3,0 | 6,0 | 2,4 | 4,2 | 3,0 | |
| 120 mm | 4,0 | 8,0 | 3,2 | 5,6 | 4,0 | |
| 150 mm | 5,0 | 10,0 | 4,0 | 7,0 | 5,0 | |
| 180 mm | 6,0 | 12,0 | 4,8 | 8,4 | 6,0 | |
| 240 mm | 8,0 | 16,0 | 6,4 | 11,2 | 8,0 | |
| 300 mm | 10,0 | 20,0 | 8,0 | 14,0 | 10,0 | |
| 300 mm | 12,0 | 24,0 | 9,6 | 16,8 | 12,0 | |
| 240 mm | 15,0 | 30,0 | 12,0 | 21,0 | 15,0 | |
| 300 mm | 20,0 | 40,0 | 16,0 | 28,0 | 20,0 | |
| Factor (KL) | 1 | 2 | 0,8 | 1,4 | 1 | |
