Talurit

The copper ferrule (TCU) is intended for stainless steel wire rope to avoid galvanic corrosion. The pressing of TCU ferrules requires approx 25% higher pressure than the corresponding T ferrule of aluminium alloy.

Note:
We do not guarantee the strength of slings for lifting activities made of Copper turnback ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of minimum breaking load (MBL) of the wire rope. Verifying tests must be done in order to secure the strength of the termination.

These ferrules have been validated according to TALURIT™ splicing system, which is within the framework of EN 13411-3. The copper material is not accepted in this standard.

  • Material: Copper (almost 99,9%)
  • Marking: According to standard
  • Standard: EN 13411-3
  • Note: See the manufacturer's product data sheet below for guidance on dimension selection.
TCU
Select a row from the table below, then click the add to quote button
Part Code Ferrule size Length
mm
1985 1 6,5
1986 1,5 8
1887 2 9
1988 2,5 12
1989 3 14
1990 3,5 16
1991 4 18
1992 4,5 20
1993 5 23
1994 6 27
7368 6,5 29
1995 7 32
1996 8 36
1997 9 40
1998 10 45
2232 11 50
1999 12 54

Diameter after pressing, see instruction.
Length is after pressing.

info / downloads